 Solidity and reliability 
The centrifugal monobloc self-priming magnetical driven pump, range MSP, it has been designed for installations. Where is not possible to install an under head pump. The MSP pumps can prime from negative suction head of 4 meters, after that the priming chamber has been filled the first time. The impeller rotation is possible thanks to a movement transmitted from the coupling through magnetical induction. this pump has been designed to solve the different problems generated sometimes from the leakage through the mechanical seals, with the consequence to cause serious environmental contaminations.
 Easy to handle, the pumps of this range are strong, compact construction, produced in their components with high thickness to give a product with the maximum reliability.
Suitable to transfer acid and basic solutions, the wet ends, are produced in thermoplastics (PP-PVDF) and O-ring in the proper elastomer material (EPDM-FPM-FEP). The impellers installed are generally semiopen, but they are available in the closed version for hot liquids and without solids in suspension. Optionally available the dry-running protector.
Exercise temperatures and materials
MATERIALS SELECTION
The materials used in the production of our pumps, are carefully selected based upon the pumped liquids. Each material used must answer at mechanical and chemical characteristics in order to grant the best reliability of the pump. The working temperature is a really important condition, especially because the thermoplastics are materials very sensible to low and high temperatures.
Performances
PUMPS SELECTION
Pumps are selected based on the data transmitted from the Customer. Capacity Q, head H, specific gravity and liquid viscosity,temperature, N.P.S.H. available in the plant are required in order to proceed to the correct pump choice. The choosed pump have to work close to the best efficency point of the curve in order to obtain a reduced energy consumption and to avoid abnormal hydrodynamic situations (cavitations,turbulences, etc.)
CURVES
RPM 2900 50Hz
|
RPM 1450 50Hz
|
RPM 3450 60Hz
|
RPM 1750 60Hz
|
|
